注册 登录  
 加关注
   显示下一条  |  关闭
温馨提示!由于新浪微博认证机制调整,您的新浪微博帐号绑定已过期,请重新绑定!立即重新绑定新浪微博》  |  关闭

徐老师-最具实战精神的咨询顾问

擅长六西格玛管理、质量体系、质量工具等质量相关咨询培训

 
 
 

日志

 
 
关于我

徐老师,质量管理培训师,咨询师。擅长品质管理、六西格玛管理培训辅导、全面质量管理TQM培训辅导、卓越绩效培训辅导、零缺陷管理培训辅导、生产管理。希望结交同行朋友及有志于改善公司现状的企业界朋友们。 Tel:13691373360 Email: xu.consultant@163.com

网易考拉推荐

MSA测量系统分析第四版  

2010-09-07 17:43:03|  分类: 管理技能工具 |  标签: |举报 |字号 订阅

  下载LOFTER 我的照片书  |

MSA第四版已于2010年6月1日正式发布

The purpose of this document is to present guidelines for assessing the quality of a measurement        system. This document is not intended to be a compendium of analyses for all measurement systems. Its       primary focus is measurement systems where the readings can be replicated on each part. Customer approval        is required for measurement systems analysis methods not covered in this manual.
       MSA手册的目的是介绍评估测量系统的质量指南。手册并不打算成为一个为所有的测量系统分析的汇编。它的主要焦点是在读数可以在每个部分可再现的测量系统。手册并不涵盖客户的认可所必需的测量系统的分析方法。
內容上增加頗多的計數型MSA分析,最新版本增加和(或)修改的内容涵盖以下主题:
?校准系统 Calibration systems
?分辨率的适合性评估 Evaluating discrimination for adequacy
?量具装配和夹具误差对测量系统分析(MSA)结果的影响 Effects of "gage assembly and fixture error" on analysing MSA results
?统计过程控制(SPC)与测量系统分析(MSA)的关系 SPC–MSA relationship
?量具重复性和再现性(GRR)的接收标准 GRR acceptability criteria
?“测量的目的”和GRR评估的联系 Link between "purpose of measurement" nd GRR evaluation
?确定偏倚(计量型MSA)Determining the bias (variable MSA)
?确定线性(计量型MSA)Determining the linearity (variable MSA)
?使用方差方法的优点(计量型MSA)Advantages of using Anova method (variable MSA)
?均值和极差法(计量型MSA)Average and Range Method (variable MSA)
?(测量)件的选择(计数型MSA)Choosing the parts (attribute MSA)
?交叉表方法(计数型MSA):Kappa一致性评估 Cross-tab method (attribute MSA)
?样本容量(计数型MSA)Sample size (attribute MSA)
?信号探测法(计数型MSA)Signal detection approach (attribute MSA)
?分析法的例子 Analytic method example (attribute MSA)
?实施不可重复的测量系统 Practices for non-replicable measurement systems

 

MSA Fourth Edition Gap Analysis(第四版MSA 变化)       
Page #        What Has Changed?
Very small changes are not included on this list.  Ex: "Introduction" title removed but info is still the same       
10 - 11        Calibration System Defined (NEW ADD)
19        Note and risk added for LSL and USL graph
21        Expanded definition on Cp (2nd sentence on page)
Old 32        "Documentation Deliverables" title removed
35        There is a paragraph indent error on the new edition - middle of the page beginning " Whatever results are achieved …", should be a new paragraph by itself
47        2nd paragraph beginning changed from "The best" to "A good".  2nd paragraph has also been altered.
48        Last Paragraph has been altered
63        The first paragraph has removed the reference to QS-9000 IS/IEC TS16949
73        Added "( c ) Customer Requirements." to the list
77        """Assembly or Fixture Error"" section added
Reference to chapter 1 added to ""Width Error"" explanation"
78 - 79        "Width error rule of thumb has been replaced with a guideline table
""Width Error"" explanation and definition has received extensive revision"
79        "Comments on the Application and Gage Acceptability" section added
81        "Chapter III title has been changed
Slight change to last billet point"
87        """Conducting the Study"" explanation has been revised/expanded
""Analysis of Results"" has an added formula"
88        Formulas and calculation information added
91        Graph added and explanation revised/improved
92        "Conducting the Study" billet 2) added
93        "Billet 3) and 4) are new additions
Billet 8) formula and definition added"
97        Billet 7) formula and definition added
101        Indent note has been added to aid in definition/understanding, "The ANOVA approach can identify appraiser … program."
103        "Average and Range Method" Definition has been revised
111        "Wiskers Chart" has been changed - 3 smaller charts changed to one larger chart
120 - 121        Definition/explanation 1) through 4) have been added
121        "Using Historical Variation Information" title added and the definition has been revised
122        "Using a Pp (or Ppk) Target Value" has been added - definition and formula added
122        "Using the Tolerance (Specification Range)" has been added - definition and formula added
122        "Indices" has been added - definition and formula added
123        Revised/Extended definition and formulas
132        "Top graph labels have more information on the LSL and USL
1st paragraph has revised/expanded definition
Last paragraph has revised/expanded definition"
133        "Hypothesis Test Analyses - Cross-Tab Method" definition is revised/expanded
135        Information is all new/added
136        Paragraph on page is revised/reworded
140        "1st paragraph has been revised/expanded
""Sample Size"" section has been added (NEW)"
141        "Sample Size" new add section continued on this page
143        "Signal Detection Approach" section has been extensively revised - revised definition, steps and guidelines - entire section has been revised/expanded
144        "Signal Detection Approach" section revision continued this page
148        Formula added middle of the page right before "To determine if the …calculate:"
151        Chapter IV title changed to  "Other Measurement Concepts and Practices" from "Practices for Complex Measurement Systems"
153        """Destructive Measurement System"" section added (NEW)
""Systems Where the Part Changes on Use/Test"" section added (NEW)
Table B has been removed (from old book)"
        "Chapter V" title has been removed - The rest of the titles have been changed to sections under "Chapter IV"
169        2nd paragraph - Some reference information has been removed
179        Numbers for example have been changed from 5.15 to 6
180 - 181        Graph labels have been changed from "Low Limit" and "High Limit" to "LSL" and "USL"
187        Item number 15) has been revised to add "where g = number of parts"
196        5.15 has been replaced with 6 throughout the page
198        Table A 5 - sentence before table has been added
213        "Bayes' Theorem" definition has been added
215        "Inter-rater agreement" definition has been added

----------------------

〉〉〉更多精彩文章,请点击下列链接进入

原创精华

1.        精益六西格玛管理是“工具集”?                管理要去除“假动作”

2.        持续改进是管的一个基本思想                  测量系统分析MSA浅析

3.        (MSA测量系统分析)量具运行图解读

4.        掌握统计工具未必要精通统计学——统计学与统计方法(原创)

5.        昂贵的“返工”——企业必须消除的“隐蔽工厂”

6.        ISO9001——质量管理体系小议

7.        统计应用—数据决策—从“全国房价平均涨813元”谈起

8.        提高新产品设计和开发的有效工具和方法 

知识类

1.         5W3H什么?/5W1H是什么?

2.         六西格玛成功的六大要素          什么是6西格玛?——百万分子三点四缺陷率 

3.         我对6sigma 的几点疑惑——解答(不完全)

4.         AS9100/IRIS/TS16949认证适用范围     TS16949术语缩写中英文件对照

5.         六西格玛词汇(汉英对照)    什么是回归分析?

6.         在做PPK分析时,是否必需取150个数据计算

7.         什么是SPC    为什么要SPC   SPC的数据收集方法——抽样方法

     装配过程如何发挥SPC的质量管控效果 

8.         MSA培训

9.         QFD介绍

10.      AS9100IRIS质量管理体系中技术状态管理 

11.      TS16949标准中“服务”指什么

12.      看板简介   ISO10012是什么?     什么是8S     

13.      IRIS)之项目管理知识体系     国际铁路行业标准IRIS内审员培训  

14.      实施零缺陷管理的“三个基础”

15.      什么是CRCC产品认证 

一千元的代价——警惕陷阱

  评论这张
 
阅读(2958)| 评论(0)
推荐 转载

历史上的今天

评论

<#--最新日志,群博日志--> <#--推荐日志--> <#--引用记录--> <#--博主推荐--> <#--随机阅读--> <#--首页推荐--> <#--历史上的今天--> <#--被推荐日志--> <#--上一篇,下一篇--> <#-- 热度 --> <#-- 网易新闻广告 --> <#--右边模块结构--> <#--评论模块结构--> <#--引用模块结构--> <#--博主发起的投票-->
 
 
 
 
 
 
 
 
 
 
 
 
 
 

页脚

网易公司版权所有 ©1997-2017